Heat shrink packaging machine in the packaging production line in the fault solution
August 26, 2022
With the advancement of science and technology, heat-shrinkable packaging machines have also accelerated the pace of development. There has been tremendous progress in technology as well as variety and function. The diversification of production enables companies to consider more when choosing heat-shrinkable packaging machines. The main ones are whether the functions are complete and the scope of the packaging is wide. Heat shrink packaging machine manufacturers will develop and produce different heat shrink packaging machines according to the needs of the company, so as to better meet the company's production. Modern enterprise production, more choice is the assembly line operation, packaging is not listed, the choice is the packaging production line, and in order to better match the production line operations, heat shrink packaging machine manufacturers to consider more of its support. However, when heat shrink packaging machines are used in production lines, we must ensure their stability and compatibility with other equipment. Based on many years of experience, Parker Dragon finds that some common breakdowns occur when heat shrink packaging machines are used in the production line. Below, to explain the common faults and some solutions.
First, the heat shrinkable packaging machine in the production of film packaging material is easy to offset and can not normally feed, which will shrink the heat shrink packaging machine can not normally shrink the object, then you can adjust the film roll position and tension balance bar, if both Invalid, can be solved by adjusting the angle of the upper triangle. If the upper layer film material deviates from the clamping chain, the upper triangular plate can be adjusted clockwise; the following layer film material is offset from the clamping material chain, and the upper triangular plate can be adjusted counterclockwise. This can solve this problem.
Second, the heat shrink packaging machine in the packaging production, the packaging site slowly warming or can not hit the standard packaging temperature (160 degrees Celsius or more), this problem can make the packaging can not achieve the desired packaging purposes. The heating process depends on the heater, should first check the heater main power line, the heater's line is the main power line through a magnetic switch to the heating pipe, so you should first detect the magnetic switch contacts are normal. If the line does not pass through one of the phases, the above phenomenon will occur. If the magnetic pick-up switch is normal, check the meter again to see if the ohms of each phase and the machine are the same. If normal should be a short circuit. If all phases are on but the line or heater is still abnormal, the heater must be replaced.
Third, in the multi-object bundled packaging, the equipment can not detect the packaged object, the packaging caused damage to the packaging, so that the packaging work can not be carried out, this happens because the heat shrink packaging machine in the middle of the bundled packaging The gap affects the detection of the electric eye, and it is only necessary to adjust the angle of detection of the electric eye of the heat shrink packaging machine to an oblique angle, so as to avoid the occurrence of the above phenomenon. The above three types of failures are common failures of heat shrink packaging machines used in production lines. We hope that the solutions we provide to you can better help you to use and produce, in order to better improve production efficiency, reduce packaging losses, and improve the product market. Competitiveness.
